IMB-1900-2L

Fanless Intel® Celeron J1900, 2.0GHz Quad-Core SoC, 10W, Bay Trail

Fanless Intel® Celeron J1900, 2.0GHz Quad-Core SoC

1 * 204-pin SO-DIMM slot supporting DDR3L-1333 up to 8GB total, 1.35V required

Intel HD Graphics

2 x Realtek RTL8111G Gigabit LAN
2 x Realtek RTL8111H Gigabit LAN (After March 2021)
1 x Realtek RTL8111G Gigabit LAN
1 x Realtek RTL8111H Gigabit LAN (After March 2021)

1 x SATA2 3Gb/s Connector
1 x M.2 SATA 2242/2260

Realtek ALC662 HD Audio
Realtek ALC888 HD Audio (Manufacturered after April 2021)

FINTEK F81866A

External Power Supply – the board can be powered with a +12V external power supply though a DC connector on the back panel. The rear +12V DC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +12V and the shell is GND.

Internal Power Supply – the board can alternatively be powered via the internal ATX12V 2 x 2 power connector.

Caution: There is no isolation circuitry between the external +12V DC jack and the internal 2 x 2 power connector. It is the system integrator's responsibility to ensure no more than one power supply unit is or can be attached to the board at any time and to ensure the external +12V DC jack is covered if the internal 2 x 2 power connector is to be used.

1 +12V 2.5mm Diameter DC-In Power Jack
1 VGA (1920 x 1080 @ 60Hz)
1 USB 3.0
3 USB 2.0
2 RJ45 LAN (10/100/1000)
2 3.5mm Audio

1 +12V 2.5mm Diameter DC-In Power Jack
1 VGA (1920 x 1080 @ 60Hz)
1 USB 3.0
5 USB 2.0
1 RJ45 LAN (10/100/1000)
2 3.5mm Audio

1 SATA2 3Gb/s Connector
1 M.2 SATA 2242/2260
1 Mini-PCI Express slot (Full-size)
12 Serial port headers (10 * RS232, 2 * RS232/422/485/TTL)
3 USB Pin Header for up to 6 additional USB 2.0 Ports
1 24-bit Dual Channel LVDS Connector/Inverter
1 SIM Card Socket
1 AT/ATX Mode Jumper
1 20-pin HDMI Header (1920x1200 @ 60Hz)
1 12-pin VGA Header (2560x1600 @ 60Hz)
1 4-pin 3W Stereo Amplifier header (Left+Right)
1 10-pin GPIO Header
1 25-pin Parallel Header
1 6-pin PS/2 Mouse/Keyboard Header
1 4-pin Fan Header
1 4-pin SATA Power Output (Male)
1 4-pin +12V Alternate Power Connector 1 SATA2 3Gb/s Connector
1 M.2 SATA 2242/2260
1 Mini-PCI Express slot (Full-size)
6 Serial port headers (6 * RS232)
2 USB Pin Header for up to 4 additional USB 2.0 Ports
1 30-pin eDP Header
1 SIM Card Socket
1 AT/ATX Mode Jumper
1 20-pin HDMI Header (1920x1200 @ 60Hz)
1 12-pin VGA Header (2560x1600 @ 60Hz)
1 4-pin 3W Stereo Amplifier header (Left+Right)
1 25-pin Parallel Header
1 6-pin PS/2 Mouse/Keyboard Header
1 4-pin Fan Header
1 4-pin SATA Power Output (Male)
1 4-pin +12V Alternate Power Connector

External Power Supply – the board can be powered with a +12V external power supply though a DC connector on the back panel. The rear +12V DC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +12V and the shell is GND.

Internal Power Supply – the board can alternatively be powered via the internal ATX12V 2 x 2 power connector.

Caution: There is no isolation circuitry between the external +12V DC jack and the internal 2 x 2 power connector. It is the system integrator's responsibility to ensure no more than one power supply unit is or can be attached to the board at any time and to ensure the external +12V DC jack is covered if the internal 2 x 2 power connector is to be used.

Windows 7 32bit/64bit
Windows 8 32bit/64bit
Windows 8.1 32bit/64bit
Windows 10 32bit/64bit
Windows Embedded Standard 7 32bit/64bit
Windows Embedded Standard 8 32bit/64bit
POSready 7 32bit/64bit
Windows Server 2008R2 64bit
Windows Server 2012R2 64bit

CentOS 6.5
Debian 7.4
Fedora 20
openSUSE 13.1
Ubuntu 13.1
pfSense 2.2
RedHat 7.0
Android 4.4.2_r1-ia2

√ Digital Security & Surveillance
√ Industrial Automation/Control
√ Medical
√ Retail (POS/Kiosk/ATM)
√ Networking/Storage Server/Mail Server/Print Server