MI12-00C

Mini-ITX Slim (170 x 170mm)

Intel® Celeron J3455 Processor Quad Core 1.50 GHz - 2.30 GHz, 10W TDP (Formerly Apollo Lake)

Celeron J3455 Processor Quad Core 1.50 GHz - 2.30 GHz

1 * 204-pin DDR3L-1866 up to 8GB total, 1.35V required

Intel HD Graphics 500, 250MHz - 750MHz (J3455)

2 x Realtek RTL8111H GbE

1 x M.2 (SATA, M-key, 2242/2260)
1 x SATA3 6Gb/s Connector
Optional 32GB eMMC

C-Media HS-100B USB Audio

FINTEK F81768D

Intel fTPM 2.0 (PTT) Trusted Computing Firmware
Intel fTPM 2.0 (PTT) Trusted Computing Firmware
Onboard NUVOTON TPM v2.0

External Power Supply – the board can be powered with a +12V external power supply though a DC connector on the back panel. The rear +12V DC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +12V (±5%) and the shell is GND.

Internal Power Supply – the board can be powered via the internal +12V 2-pin power connector, where pin 1 is +12V and pin 2 is GND. The internal 2-pin power connector accepts a JST VHR-2N or TE 1-1123722-2 plug from the power supply. Or use Jetway G01-PWDCJK-2P20-F DC-in cable for alternatively 12V AC adapter.

1 12V DC Jack
2 HDMI 1.4 (3840 x 2160 @ 30Hz)
2 RJ45 LAN (10/100/1000)
4 USB 3.2 Gen1 (5 Gbps)
1 3.5mm Line-out Jack

1 SATA3 6Gb/s Connector
1 M.2 M-Key, 2242/2260 (SATA)
1 Mini PCIe (USB only)
1 SIM Card Socket
6 Serial Headers (1 * RS232/422/485, 5 * RS232, 2.00mm pitch)
3 USB Pin Headers for 5 additional USB 2.0 Ports
1 eDP (3840 * 2160 @ 60Hz)
1 24-bit Dual Channel LVDS (1920 x 1200 @ 60Hz)
1 8 bit GPIO Header
1 AT/ATX Mode Jumper
1 5-pin SMBUS Header
1 6-pin PS2 Keyboard/Mouse Header
2 4-pin Fan Header
1 4-pin Power-out Connector for 2.5" HDD/SSD
1 2-pin +12V Power-out connector (Mating plug: JST VHR-2N or TE 1-1123722-2)

External Power Supply – the board can be powered with a +12V external power supply though a DC connector on the back panel. The rear +12V DC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +12V (±5%) and the shell is GND.

Internal Power Supply – the board can be powered via the internal +12V 2-pin power connector, where pin 1 is +12V and pin 2 is GND. The internal 2-pin power connector accepts a JST VHR-2N or TE 1-1123722-2 plug from the power supply. Or use Jetway G01-PWDCJK-2P20-F DC-in cable for alternatively 12V AC adapter.

Windows 10 64bit
Win 10 IoT Enterprise 64-bit

CentOS 8
Debian 10.1
Fedora 28.1.1
openSUSE Leap 15.1
Ubuntu 18.04
pfSense 2.4.4
Redhat 7.5
FreeNAS 11.2
Android x86 8.1_rc2